Mafell UVA115E

The concept:
The very best sanders are judged not only by results, but also by the way in which the outcome is achieved.

The criteria we apply to a top-quality sanding system are accordingly high. We seek to combine excellent sanding results with a high removal rate and perfect ergonomics.

In the woodworking industry in particular, the desire to meet these requirements has often entailed the use of several different sanding systems.

Our latest development, the UVA 115 E orbital sander, satisfies all these demands in a single device. As you would expect of an orbital sander, the UVA 115 E produces an exceptionally flat surface without any hollows.

Its high stock removal rate is ensured by Abranet© media, and the sander's ergonomic credentials are underpinned by first-class vibration figures.

With residual vibration of just 1.9 m/s² at the rear handle, the UVA 115 E is in a class of its own.

By adding further innovative details, including the detachable Delta base plate, we have realized our concept of the best sanding system for the woodworking trade: the UVA 115 E.

Electronics
For sanding plastic or painted surfaces, the speed can be electronically adjusted and locked. This option avoids excessive heat and sticking of the sanding paper.

Construction
The armature of the MAFELL motor is new.Together with the new sanding pad mounting, it was designed specifically for the needs of the UVA 115 E. This orbital sander is also very effectively sealed against dust, which contributes to its long
service life.

Application range
The MAFELL orbital sander can perform every type of sanding work on a variety of materials, from wood to metal, and make even large surfaces perfectly smooth with very little effort and power input. These qualities are especially important in the internal finishing segment, where wood, wood products and gypsum wallboards often require extensive sanding.

The UVA 115 E is ideally suited to both coarse and fine sanding of hard and soft woods. The sanding tasks that arise when painting, such as sanding between coats, are also easy to execute. Since the sanding plate does not perform any rotary motion, edge work and chamfering also fall within the sander's scope.

* Use either the velcro fastening system for quick fastening of sanding paper or the quick-clamp-system for material on a roll
* Ergonomically shaped handles ensure non-tiring work even in extreme positions on walls and ceilings
* Sanding pressure on the workpiece is corrected at the edges by means of an all-round groove in the foam rubber sanding plate
* Provides a perfect, consistent sanding result, even at the edges
* Efficient, built-in extraction system ensures that the air remains free of dust

*
Rated input : 450W
*
Sanding area: 115 x 230mm
*
Sanding Stroke: 2.6mm
*
Nominal No. of strokes - no load: 4000-24000 /min
*
Weight: 2.7kg
*
Motor: 240V/50Hz

*
1 universal filter bag UFB-1
*
1 set of Abranet© abrasive mesh strips:
*
1 sheet each of Abranet© abrasive mesh strip P 60 / P 80 / P 100 / P 120 / P 150 / P 180 / P 240 / P 320
*
1 pack of Abranet© abrasive mesh P 80; 35 strips 093411
*
1 pack of Abranet© abrasive mesh P 120; 40 strips 093413
*
1 UVA-SA 10 interface pad (10 holes), 115 x 230 mm 093420
*
1 Delta 105 sanding pad for quick-fit sanding paper
*
1 sheet of Abranet© Delta 105 abrasive mesh, P 120
*
1 UVA-SA Delta 105 interface pad 093421
*
1 power lead 4 m